The Colex Sharpcut Conveyer can be used for a variety of applications:
Removal of Finished Jobs: The Sharpcut Conveyor efficiently speeds up the removal of finished jobs from the cutting table.
Fabrics/Textiles Cutting: Combine the Sharpcut Conveyor with the Roll Feeder and the Clamping Bar to cut fabrics/textiles.
Board Cutting Pallet to Pallet: Combine the Sharpcut Conveyor with the Automatic Board Feeder (including Pallet Table) and Clamping Bar for board cutting. Cuts up to 70 boards (soft) 4’ X 8’ per hour.
Sharpcut Conveyor Automation Options
Automatic Board Feeder
The board feeder is designed to load semi-rigid to rigid boards from the pallet table onto the conveyor belt. It is designed to work with a large array of material sizes and thicknesses.
When used with the Automatic Board Feeder the pallet table will automatically maintain the material height. The pallet table drops down to 6” in height for easy loading and unloading of the pallets.
The clamping bar insures that the material advances at the same rate as the belt as it advances down the table. The clamping bar is to be used in conjunction with either the Roll Feeder or the Automatic Board Feeder to insure consistent material placement before cutting.
For manual and automatic feeding of flexible rolls.
The unique design of the Colex SharpCUT’s Triple interchangeable Tool Head allows you to quickly and efficiently switch between jobs. The individual tool modules can be switched in and out of the cutting head in seconds.
The Sharpcut, powered by Colex Cut Center can read any diameter registration mark, crop mark or square resulting in highly efficient production.
Vision Registration Video
The Colex SharpCUT has a very unique vacuum hold down system, unlike our competitors that have one or two vacuum blowers for the entire table surface. The Sharpcut has one vacuum blower per vacuum zone (On a 5’x10’ model this is a 30”x40” area).
Our cutting table is designed for cutting sheet and rigid materials while delivering clean, smooth edge quality. The gantry is made out of Aerospace aluminum alloy, strong enough to accommodate the optional 3HP Router. The cutting surface of the machine can withstand 1,000+ pounds of pressure.